Obtenção de filmes espessos de seleneto de cobre sobre carbono vítreo, ouro, titânio e cobre
AUTOR(ES)
Rabelo, Adriano César, Arantes, Tatiane Moraes, Bottecchia, Otávio Luiz
FONTE
Química Nova
DATA DE PUBLICAÇÃO
2007-04
RESUMO
Copper selenide (berzelianite) films were prepared on the title substrates using the chemical bath deposition technique (CBD). Film composition was determined by energy dispersion of x-rays. The kinetics of film growth is parabolic and film adherence limits the film thickness. On titanium, copper selenide forms islands that do not completely cover the surface, unless the substrate is prepared with a tin oxide layer; film composition also depends on the titanium oxide layer. On vitreous carbon, CBD and mechanical immobilization techniques lead to films with similar resistances for the electron transfer across the film/substrate interface. On gold, composition studies revealed that film composition is always the same if the pH is in the range from 8 to 12, in contrast to films prepared by an ion-ion combination route. On copper, a new procedure for obtaining copper selenide films as thick as 5 µm has been developed.
Documentos Relacionados
- Obtenção e caracterização de carbono vítreo reticulado
- Remocao de cobre (II) em eletrodos de platina-polipirrol e carbono vitreo reticulado
- Estudos comparativos entre carvão ativado e resina de troca iônica para adsorção de ouro, cobre e ferro
- Farmacologia ocular aplicada no tratamento de doenças do vítreo, retina e coróide
- Ouro, ferro e manganês na área central do Amapá, Brasil