Numerical Simulation of Zr-based Bulk Metallic Glass During Continuous Casting Solidification Process
AUTOR(ES)
Tang, Renhong, Zhou, Bingwen, Ma, Yuejiao, Jia, Fei, Zhang, Xingguo
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
23/10/2015
RESUMO
A numerical simulation method was used to analyze the solidification process of Zr-based bulk metallic glass (BMG) during the horizontal continuous casting (HCC) process. The large-scale general-purpose finite element analysis software ANSYS was adopted to develop a temperature field model. The variation of temperature field in the specific area at different time was studied. Its accuracy was verified by the experimental results of Zr48Cu36Ag8Al8 bulk metallic glass continuous casting solidification process. The effects of casting parameters include intermittent casting procedure (drawing and stopping), casting speed, pouring temperature and cooling rate. The results show that the optimum casting speed range is 1-2 mm/s, pouring temperature is 1223 K and cooling rate of 10 mm rod casting is 5 L/min respectively. A fully Zr-based bulk metallic glass whose diameter is 10 mm and length has no limitation has been successfully fabricated.
Documentos Relacionados
- Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys
- New Zr-based glass-forming alloys containing Gd and Sm
- A Numerical Simulation of a Ni-based Bulk Metallic Glass During Compressive Deformation and Fracture
- Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
- Glass Forming Ability and Mechanical Properties of Zr57.52Co21.24Al9.24Ag12 bulk metallic glass