Numerical Description of Hot Flow Behaviors at Ti-6Al-2Zr-1Mo-1V Alloy By GA-SVR and Relative Applications
AUTOR(ES)
Quan, Guo-Zheng, Zhang, Zhi-hua, Zhou, Yuting, Wang, Tong, Xia, Yu-feng
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
29/09/2016
RESUMO
Hot compression tests of as-cast Ti-6Al-2Zr-1Mo-1V alloy in a wide temperature range of 1073-1323 K and strain rate range of 0.01-10 s-1 were conducted by a servo-hydraulic and computer-controlled Gleeble-1500 machine. The hot flow behaviors of Ti-6Al-2Zr-1Mo-1V alloy show highly non-linear relationships with strain, strain rate and temperature. In order to accurately and effectively characterize the complex flow behaviors, support vector regression (SVR) which is a machine learning method was combined with Genetic Algorithm (GA) to characterize the flow behaviors, namely, the GA-SVR. The study abilities, generation abilities, and modeling efficiencies of the improved Arrhenius-type constitutive model, ANN, and GA-SVR for flow behaviors of as-cast Ti-6Al-2Zr-1Mo-1V alloy were detailedly compared. Comparison results show that the study ability of the GA-SVR is as strong as the ANN. The generation abilities and modeling efficiencies of these models were shown as follows in ascending order: the improved Arrhenius-type constitutive model < ANN < GA-SVR. Based on the established GA-SVR, the continuously three-dimensional relationships among flow stress, temperature, strain, and strain rate were constructed, which improve the simulation accuracy and related research fields where stress-strain data play important roles.
Documentos Relacionados
- Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications
- Microstructure and Mechanical Properties of Ti-12Mo-8Nb Alloy Hot Swaged and Treated for Orthopedic Applications
- Modelling the Hot Flow Behaviors of AZ80 Alloy by BP-ANN and the Applications in Accuracy Improvement of Computations
- Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
- Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications