Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
AUTOR(ES)
Teixeira, Renan de Souza; Chalhub, Daniel José Nahid Mansur; Massari, Pollyana de L
FONTE
REM, Int. Eng. J.
DATA DE PUBLICAÇÃO
2021-01
RESUMO
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel to create atmospheric characteristics for the analysis. In the current study, numerical and experimental investigations of the thermally stratified boundary layer are performed. The experimental data are measured using Inmetro’s atmospheric wind tunnel. Two different spires set configurations and inlet velocities are considered. Moreover, the compressible Navier-Stokes equations using the k-epsilon turbulence model are computed by OpenFOAM opensource software. The simulated results and measured data presented a good overall agreement and showed that the proposed configuration provides the desired thermal and dynamic boundary layer necessary for the study of ABL.
Documentos Relacionados
- Wind tunnel simulation of atmospheric boundary layer flows
- Simulations of the Atmospheric Boundary Layer in a Wind Tunnel with Short Test Section
- Wind Tunnel Simulation of the Atmospheric Boundary Layer for Studying the Wind Pattern at Centro de Lançamento de Alcântara
- Studies using wind tunnel to simulate the Atmospheric Boundary Layer at the Alcântara Space Center
- Numerical simulation of wind waves on the Río de la Plata: evaluation of four global atmospheric databases