Novel Chemical Route for Deposition of Cu2ZnSnS4 Photovoltaic Absorbers

AUTOR(ES)

Gordillo, Gerardo, Becerra, Raul A., Calderón, Clara L.

FONTE

J. Braz. Chem. Soc.

DATA DE PUBLICAÇÃO

2018-03

RESUMO

This work reports results of a study carried out to optimize the preparation conditions of Cu2ZnSnS4 (CZTS) thin films grown by sequential deposition of Cu2SnS3 (CTS) and ZnS layers, where the Cu2SnS3 compound was grown using a novel procedure consisting of simultaneous precipitation of Cu2S and SnS2 performed by diffusion membrane assisted chemical bath deposition (CBD) technique. The precipitation across the diffusion membranes allows achieving moderate control of release of metal ions into the work solution favoring the heterogeneous growth mainly through an ion-ion mechanism. Through a parameters study, conditions were found to grow Cu2SnS3 thin films which were used as precursors for the formation of Cu2ZnSnS4 films. The formation of CZTS thin films grown in the Cu2ZnSnS4 phase was verified through measurements of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Solar cells with efficiencies of 4.9% were obtained using CZTS films prepared by membrane assisted CBD technique as absorber layer.

Documentos Relacionados

• Contrastive Research on Electrical Contact Performance for Contact Materials of Cu-SnO2 and Cu-ZnO2 Alloys
• A new route for preparing CdS thin films by chemical bath deposition using EDTA as ligand
• Correlations of microstructure and mechanical properties of the ternary Sn-9wt%Zn-2wt%Cu solder alloy
• Microestrutura de solidificação e propriedades mecanicas de ligas Sn-Zn para soldagem e recobrimento de superficies
• Chemical equilibrium in the complexation of first transition series divalent cations Cu2+, Mn2+ and Zn2+ with chitosan