Microstructural Transformation in a Root Pass of Superduplex Stainless Steel Multipass Welding
AUTOR(ES)
Villalobos-Vera, Doris Ivette, Mendoza-Bravo, Ivan
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
06/02/2017
RESUMO
The microstructure of the root pass in a superduplex stainless steel multipass welding was investigated.Results showed that the welding metal has an austenite matrix with particles of sigma phase formed in the ferrite/austenite interface and intragranularly.Eventhough the filler metal is intended to keep the phase balance after welding,the welding metal presented a considerable decrease in the ferrite content and a high proportion of sigma phase. Despite the exposition to thermal cycles on every pass, the heat affected zone presented a microstructure consisting of ferrite and austenite with a small proportion of sigma phase.Therefore,the thermal cycles of every welding pass allowed the decomposition of ferrite into austenite and sigma phase in points close to the heat source, changing the final microstructure.
Documentos Relacionados
- Sigma Phase in Superduplex Stainless Steel: Formation, Kinetics and Microstructural Path
- Microstructural changes in SAF 2507 superduplex stainless steel produced by thermal cycle
- Nondestructive Microstructural Characterization of Superduplex Stainless Steel by Double Loop Electrochemical Polarization Reactivation Portable Test
- Friction stir welding of duplex and superduplex stainless steels and some aspects of microstructural characterization and mechanical performance
- Microstructural Transformations in Dissimilar Welds between Austenitic Stainless Steel and Ferritic Stainless Steel