Microstructural Characterization and Evaluation of the Thermomechanical Behavior of an Al 7075-T651 Alloy Deformed by Two Passes of ECAP
AUTOR(ES)
Silva, Daniel Carvalho, Rezende, Mônica C., Medeiros, Neil de
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
17/11/2017
RESUMO
Billets of an Al 7075-T651 alloy were processed by two passes of equal channel angular pressing, ECAP, by following route A. First pass was performed at 180°C and the second one in the temperatures 130 and 180°C. The resulting microstructures were characterized by optical microscopy, OM, and scanning electron microscopy, SEM. Also, material macroscopic mechanical properties were evaluated by performing uniaxial compression and Vickers microhardness tests. After the second pass, it was not verified a noticeable grain refinement. After second pass at 130ºC, the samples presented higher mechanical strength than observed after their processing at 180°C and the second pass resulted in a decrease in the mechanical properties compared to the deformation by one pass at 180°C.
Documentos Relacionados
- Microstructural development and tensile strength of an ECAP: deformed Al-4 wt. (%) Cu alloy
- On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling
- Microstructural evolution of AA7050 al alloy processed by ECAP
- Tensiones residuales en uniones soldadas por FSW en aluminio 7075-T651
- Efecto del procedimiento de soldadura por FSW en la evolución temporal de las propiedades en uniones de AA 7075-T651