Influence of different surface treatments on the fracture toughness of a commercial ZTA dental ceramic
AUTOR(ES)
Silva, Flavio Teixeira da, Zacché, Marcio Alessandro Negrelly, Amorim, Helio Salim de
FONTE
Materials Research
DATA DE PUBLICAÇÃO
2007-03
RESUMO
The objective of this study was to investigate how mechanical surface treatments performed for removal of excess of molten glass, influence the fracture toughness of a dental zirconia toughened alumina (In-Ceram® Zirconia). Infiltrated ZTA disks were submitted to three different surface treatments (grinding, sandblasting and grinding + sandblasting + annealing). Fracture toughness was accessed through indentation strength test (IS). X ray diffraction was used to investigate the metastability of tetragonal zirconia particles under all treatments proposed. Kruskall-Wallis non-parametrical test and Weibull statistics were used to analyze the results. Grinding (group 1) introduced defects which decreased the fracture toughness and reliability, presenting the lowest K IC. On the other hand, grinding followed by sandblasting and annealing (group 3) presented the highest K IC. Sandblasting (group 2) presented the highest reliability but lower K IC compared to group 3.
Documentos Relacionados
- Influence of mechanical surface treatments on the indentation fracture toughness of glass infiltrated zirconia toughened alumina "GI-ZTA" disks
- Effect of Different Surface Treatments for Ceramic Bracket Base on Bond Strength of Rebonded Brackets
- Investigation on the Effect of Different Pre-Cracking Methods on Fracture Toughness of RT-PMMA
- Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys?
- Shear bond strength of ceramic brackets after different pre-treatments in porcelain surface