Fracture Modes of AISI Type 302 Stainless Steel Under Metastable Plastic Deformation

AUTOR(ES)

Santos, Jheison Lopes dos, Monteiro, Sergio Neves, Cândido, Veronica Scarpini, Silva, Anderson Oliveira da, Tommasini, Flavio James

FONTE

Mat. Res.

DATA DE PUBLICAÇÃO

09/11/2017

RESUMO

Martensitic transformation can be induced by plastic deformation in metastable iron-based alloys, such as stainless steels containing limited amounts of C, Ni and Cr. This transformation takes place at the temperature range from Ms and Md, usually at relatively lower temperature values. The transformed martensite has been associated with maximum ultimate strength and relatively high ductility. In the present work, the tensile fracture characteristics of a metastable AISI type 302 stainless steel was properties were compared to those of a stable AISI type 310 austenitic stainless steel. It was found that in 302 steel, its high degree of metastability and dilute dispersion of inclusions result in higher strength and complex modes of fracture, one of which consisting of martensite surrounding globular inclusions.

Documentos Relacionados

• Softening Mechanisms of the AISI 410 Martensitic Stainless Steel Under Hot Torsion Simulation
• Texture analysis of deformation induced martensite in an AISI 301L stainless steel: microtexture and macrotexture aspects
• High Temperature Plastic Instability and Dynamic Strain Aging in the Tensile Behavior of AISI 316 Stainless Steel
• Relevance of Dynamic Strain Aging under Quasi-Static Tension on AISI 304 Stainless Steel
• Deformation induced martensite in an AISI 301LN stainless steel: characterization and influence on pitting corrosion resistance