Flutter Instability of Timoshenko Cantilever Beam Carrying Concentrated Mass on Various Locations
AUTOR(ES)
Sohrabian, Majid, Ahmadian, Hamid, Fathi, Reza
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
2016-12
RESUMO
Abstract This paper presents effects of shear deformation on flutter instability of cantilever beam subject to a concentrated follower force. The discrete form of equation of motion is formulated based on the Lagrange. In the presented formulation, the beam is modeled using Timoshenko beam theory, and constant shear distribution through the thickness of the beam is considered. Consistent interpolation scheme is adopted to avoid the shear locking for thin beams. Consequently, convergence of the finite element simulation is enhanced. The effect of rotary inertial term is considered in the flutter study, which has significant influence on the beam behavior as the beam thickness increases. The axial degrees of freedom are taken into account in energy expressions, to improve the accuracy of the results. Results presented for different beam geometries. The numerical results show high efficiency and good convergence characteristic. The effect of concentrated mass on the flutter instability of beam is considered and results are presented for various locations and values of concentrated masses. Furthermore, the shear effects are highlighted in this study by comparing the results obtained from the Euler-Bernoulli with those obtained from the Timoshenko beam model.
Documentos Relacionados
- Dynamic model of large amplitude vibration of a uniform cantilever beam carrying an intermediate lumped mass and rotary inertia
- Nonlinear Vibrations of Cantilever Timoshenko Beams: A Homotopy Analysis
- Timoshenko beam with uncertainty on the boundary conditions
- Finite element formulation and analysis of a functionally graded Timoshenko beam subjected to an accelerating mass including inertial effects of the mass
- Water Diffusion in Double Cantilever Beam Adhesive Joints