Evolution of texture and microstructure during thermo-mechanical processingin ultrathin low carbon steels

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

2015-09

RESUMO

ABSTRACT In this research paper an analysis concerning the evolution of crystallographic texture during hot rolling processing of low carbon steel is presented. The study was performed on a steel sheet with an initial thickness of 1.9 mm used in the process of cold rolling. In order to assess the differences between tensile and compressive deformation, a 90˚ cold bending was carried out in this specimen. Texture evolution analysis greatly helps to assess the effect of some mechanical properties, particularly formability. The material was annealed under different conditions of time and temperature using an inert atmosphere. The chemical composition was determined by optical emission spectrometry. The study of crystallographic texture present in this steel was performed using the electron backscatter diffraction (EBSD) technique by means of OIM (Orientation Imaging Microscopy) mapping, inverse pole figures and orientation distribution functions (ODFs). Electron diffraction Backscattered (EBSD) is a technique that allows to detect and analyze information crystallographic on the surface of a sample which is observed by scanning electron microscope (SEM). An analysis of the effect of processing parameters and differences between tensile and compressive deformation on the microstructure and crystallographic texture changes in these materials is presented. The results are discussed in terms of both the resulting anisotropy after the annealing treatment and the primary fibers founded by this technique.

Documentos Relacionados