ELETRORRECUPERAÇÃO DE COBRE UTILIZANDO REATOR ELETROQUÍMICO DE LEITO DE JORRO
AUTOR(ES)
Britto-Costa, Pedro H., Ruotolo, Luís A. M.
FONTE
Quím. Nova
DATA DE PUBLICAÇÃO
2015-06
RESUMO
In this work, copper electrowinning using a three-dimensional spouted-bed electrode (SBE) was studied in order to investigate the effects of current density (i), concentration of supporting electrolyte (Cs), pH, electrolyte temperature, and bed thickness on the process current efficiency (EC), energy consumption (CE) and space-time yield (Y). The results indicated that the SBE may be successfully used for the electrowinning of copper when the copper ion concentration is high and the pH is between 1 and 2. In this case, 100% CE, 2.7 kWh kg-1 EC and 118 kg L-1 h-1 Y can be achieved. It was verified that an increase in the electrolyte temperature caused a decrease in the electrodeposition rate (from 3.97 g L-1h-1 to 1.17 g L-1 h-1), indicating that, despite the solution conductivity enhancement, temperature promoted the increase in the anodic dissolution kinetics. The results also showed that EC depends on the applied current density, whereby greater EC values can be obtained using high current densities. Finally, the copper particles were analyzed by scanning electron microscopy and it was confirmed that a smooth, uniform and compact electrodeposit can be obtained without using any chemical additives.
Documentos Relacionados
- Comparação dos processos de eletrodeposição de íons cobre usando reatores de leito fluidizado e leito de jorro
- Estudo do comportamento eletroquímico de substâncias complexantes utilizando eletrodo de cobre
- Analise experimental da secagem de feijão em leito fixo, leito de jorro e leito de jorro fluidizado
- Desenvolvimento de processo de recobrimento de ureia com enxofre utilizando leito de jorro bidimensional
- Recobrimento de sementes de brocolos em leito de jorro e leito fluidizado