Effect of Sterilization by Dry Heat or Autoclaving on Bacterial Penetration through Berea Sandstone
AUTOR(ES)
Jenneman, Gary E.
RESUMO
A study was undertaken to determine why bacteria could penetrate lengths of consolidated sandstone (Berea) faster when the sandstone was sterilized by autoclaving than when dry heat (150°C, 3 h) was used. Changes in permeability, porosity, and pore entrance size of the rock as a result of autoclaving were not sufficient to explain the differences in penetration times observed, but electron dispersion spectroscopy and electron microscopy of the rock revealed changes in mineral composition and clay morphology. Autoclaved cores contained more chloride than dry-heated cores, and the clays of autoclaved cores were aggregated and irregularly shaped. Therefore, the decreases in bacterial penetration rates caused by autoclave sterilization were probably the result of a change in surface charge of the pores of the rock and of a reduction in surface area of clays available for adhesion. The results implied that dry-heat sterilization was preferable to autoclaving when examining biotic and abiotic interactions in a native-state rock model.
ACESSO AO ARTIGO
http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=238812Documentos Relacionados
- Microbial Penetration through Nutrient-Saturated Berea Sandstone
- Sterilization by dry heat
- The Effect of Glucose and Heat Sterilization on Bacterial Assimilation of Cystine1
- Effect of Temperature and Gas Velocity on the Dry-Heat Destruction Rate of Bacterial Spores1
- Interaction of Pseudomonas putida ATCC 12633 and Bacteriophage gh-1 in Berea Sandstone Rock