Efeito do tempo pos-prensagem na adaptação das bases de proteses totais confeccionadas com resina acrilica QC-20 em diferentes ciclos de polimerização
AUTOR(ES)
Silvia Helena Marques Padovan
DATA DE PUBLICAÇÃO
2001
RESUMO
This study evaluated the influence of the post-compressing rest time (immediate, 12 h and 24 h) and the cycles of polymerization (conventional, fast cycle, and by microwave energy) on the adaptation of complete denture bases made with the fast polymerization acrylic resin QC-20. Forty-five plaster rock models were made from a metallic master model of an edentulous maxilla. Using these models, denture bases with a uniform thickness of 1.5 mm were obtained. These bases were then randomly divided into 9 groups of 5 samples each: Group 1- post-compressing rest immediate time and conventional polymerization; Group 2- post-compressing rest immediate time and fast cycle polymerization; Group 3- post-compressing rest immediate time and polymerization by microwave energy; Group 4- post-compressing rest time 12 h and conventionalpolymerization;Group 5- post-compress ingrest time 12 h and fast cycle polymerization; Group 6- post-compressing rest time 12 h and polymerization by microwave energy; Group 7- post-compressing rest time 24 hours and conventional polymerization; Group 8- postcompressing rest time 24 hours and fast cycle polymerization; and Group 9- post-compressing rest time 24 hours and polymerization by microwave energy. After cooling the flasks at room temperature, the denture bases were removed, trimmed, finished and fixed in their respective plaster models with adhesive Super Bonder (Loctite). The denture base-modeI set was sectioned in three frontal sections, and the surfaces were polished with sandpaper in an electric polishing machine. In each section, seven reference points were marked for the recording of the gap between base and model using an optical microscope. Data were analyzed at the 5 % leveI of significance. The results suggest that the post-compressing rest time did not influence the adaptation of denture bases. The widest gap occurred in section C (posterior) independent1y of the post-compressing rest time and cyc1e of polymerization
ASSUNTO(S)
protese dentaria completa resinas acrilicas dentarias
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000219194Documentos Relacionados
- Efeito do tempo pos-prensagem sobre a rugosidade, dureza e porosidade superficial da resina acrilica QC 20, em diferentes ciclos de polimerização
- Influencia dos ciclos de polimerização sobre a adaptação das bases de protese total confeccionadas com resina acrilica QC-20
- Efeito do tempo pós-prensagem da resina acrílica na alteração dimensional da base de prótese total
- Adaptação das bases de protese total superior sob influencia da interação gessos de inclusão e tempos pos-prensagem da resina acrilica
- Estudo da adaptação e porosidade de bases de proteses confeccionadas com resina acrilica dental submetidas a dois ciclos de polimerização