Duplex Al-based thermal spray coatings for corrosion protection in high temperature refinery applications

AUTOR(ES)

Rocha, Adriana da Cunha, Rizzo, Fernando, Zeng, Chaoliu, Paes, Marcelo Piza

FONTE

Materials Research

DATA DE PUBLICAÇÃO

2004-03

RESUMO

The application of thermal spray coatings has been effective in preventing corrosion of steel and iron products. It has been used in a wide range of applications spreading from the petroleum to the food industry. In this work, the performance and effectiveness of a two-layered aluminum-based thermal spray coating applied to an ASTM A387 G11 steel was evaluated. The coating structure was comprised of an inner Al-Fe-Cr layer and an outer layer of aluminum. Coated samples were tested in the reactor zone of a fluid catalytic cracking unit (FCCU) of a petrochemical plant for 2.5 years. The reactor zone temperature was about 793 K (520 °C) and the environment was a mixed gas containing sulfur, oxygen and carbon. Laboratory-scale tests were also conducted on the coated samples in order to gain a better understanding of the corrosive effect of the gaseous species present in the FCCU atmosphere. Porosity present in the thermal spray coatings allowed the penetration of the atmosphere corrodents, which instigated intergranular corrosion of the steel substrate. The presence of an inner Al-Fe-Cr layer did not prevent coating spallation, which further contributed to the internal corrosion process.

Documentos Relacionados

• Development and Applications of Highly Functional Al-based Materials by Use of Metastable Phases
• Recent Topics on the Structure and Crystallization of Al-based Glassy Alloys
• Nano-structured alloy and composite coatings for high temperature applications
• Promising duplex coatings for tribological applications at elevated temperatures
• Computer-based simulation of high-temperature corrosion phenomena