DESENVOLVIMENTO DE UMA CÉLULA TRIAXIAL CÍCLICA SERVO CONTROLADA E ESTUDO DA SUSCEPTIBILIDADE À LIQUEFAÇÃO DE UM RESÍDUO DA LAVRA DE MINERAÇÃO DE FERRO / DEVELOPMENT OF A SERVO-CONTROLLED CYCLIC TRIAXIAL CELL AND STUDY OF THE LIQUEFACTION SUSCEPTIBILITY OF TAILINGS FROM AN IRON MINING
AUTOR(ES)
SERGIO TIBANA
DATA DE PUBLICAÇÃO
1997
RESUMO
This work presents results of na experimental research programme executed in the laboratory at PUC-Rio, Brazil. The aim of this research was investigated the stress-strain behaviour and the evaluation of the susceptibility of fine grained tailing material from Fernandinho Mine to liquefaction. This mine is at Quadrilatero Ferrífero (Minas Gerais - Brazil), region with one of the largest sources of iron ore in Brazil.In order to study the susceptibility to liquefaction of tailing material an servocontrolled triaxial device was developed. This device were composed by: triaxial cell, servo-motors,pressure regulators, microcomputer, one digital analogy convert of, one analogy digital convert developed in the laboratory at PUC-Rio and other accessories. During the development of the device, one software to control all the trajetories was implemented. Using this device some cyclic and monotonic triaxial tests were carried out.Complete characterization, mineralogical and eletronic microscope analysis were carried out in the preliminary steps of this research. After this, an extensive programme of triaxial tests were carried out in order to determine the failure envelope, stress-strain behaviour and liquifiction resitance of the tailing material.A colapsive behavior of the tested material was observed at small strain and stress conditions. Another important observation was the high level of poropressure development,suggesting that this material is susceptible to liquefaction in special conditions.Finally, based on the test results, a new methodology is proposed to investigate soils when submitted to undrained conditions.
ASSUNTO(S)
mining residue liquefaction triaxial ciclico liquefacao cyclic triaxial residuo de mineracao
ACESSO AO ARTIGO
Documentos Relacionados
- DESENVOLVIMENTO DE UM SISTEMA TRIAXIAL SERVO-CONTROLADO E AVALIAÇÃO DO COMPORTAMENTO MECÂNICO DE UM SOLO RESIDUAL DE BIOTITA GNAISSE
- Use of an equipment cyclic triaxial for study of the liquefaction of fine grained tailings a mixture
- Monitoring tailings dams of the mining.
- Comportamento de hidratação e resposta cisalhante cíclica de resíduo de mineração cimentado reforçado com fibras
- DESENVOLVIMENTO DE UMA METODOLOGIA PARA MINERAÇÃO DE TEXTOS