Corrosion Behavior of Austenitic Stainless Steels in CO2-Saturated Synthetic Oil Field Formation Water
AUTOR(ES)
Cardoso, Jorge Luiz
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
05/09/2019
RESUMO
The corrosion behavior of austenitic and superaustenitic stainless steels was investigated in carbon dioxide-saturated synthetic oil field formation water using cyclic polarization tests. In order to measure the effect of carbon dioxide pressure, the samples were also exposed in a pressurized medium containing carbon dioxide and synthetic air. For this purpose, tests were performed for long exposure time at 80 °C under 8 MPa of a mixture of carbon dioxide and synthetic air both acting togethere. The results indicated that the type of corrosion on the surfaces of the samples after all the tests was pitting corrosion. According to the results, the AL-6XNPLUS™ steel presented the best performance in all experiments. The results also indicated that the conventional austenitic stainless steels are not suitable for the use in carbon dioxide containing environment in aqueous medium.
Documentos Relacionados
- Investigation of Stress Corrosion Cracking of Austenitic, Duplex and Super Duplex Stainless Steels under Drop Evaporation Test using Synthetic Seawater
- Corrosion Behavior of Duplex and Lean Duplex Stainless Steels in Pulp Mill
- Formability evaluation of two austenitic stainless steels
- The Structure and Composition of Corrosion Product Film and its Relation to Corrosion Rate for Carbon Steels in CO2 Saturated Solutions at Different Temperatures
- Evaluation of erosion-corrosion resistance in Fe-Mn-Al austenitic steels