Contribuição à modelagem da secagem em leito deslizante concorrente

AUTOR(ES)
DATA DE PUBLICAÇÃO

2005

RESUMO

The modelling of heat and mass transfer between the air and soybean seeds in moving bed dryers is based on the application of mass and energy balances equations for both solid and fluid phases (two phases model). In the development of these equations, some classic hypotheses are assumed, such as flat air velocity profiles and constant physico-chemical parameter along the bed, among others. The main goal of this thesis was to discuss the validity of these assumptions in concurrent moving bed dryer modelling. For so much, several equations of bed porosity and air velocity distribution were considered and compared with experimental data. This study verified that non-flat fluid velocity profiles are significant in beds with reason dT /dp = 13, 3. The equation that best represented the experimental data was the Fahien e Stankovich (1979) equation. This equations was incorporated to the two phases model. Through comparisons between the experimental data and the simulated responses it was possible to verify the significant influence of the air velocity distribution in the drying process. The influences of some physico-chemical parameters of the model were also analyzed through sensitivity studies using experiment design and derivative methods using the code DASPK 3.0. The model presented large absolute sensitivity to the perturbations of the parameter specific heat of the dry air (Cpf ). This means then that small variations in the value of this parameter have strong influence in the results obtained by the model.

ASSUNTO(S)

transferência de calor e massa perfil radial de velocidade calor - transmissão soybean seeds sensitivity analysis leito deslizante engenharia quimica heat and mass transfer radial velocity profile sementes de soja análise de sensibilidade soja - semente moving bed

ACESSO AO ARTIGO

Documentos Relacionados