Comparison between a conventional membrane bioreactor (C-MBR) and a biofilm membrane bioreactor (BF-MBR) for domestic wastewater treatment
AUTOR(ES)
Subtil, E. L., Mierzwa, J. C., Hespanhol, I.
FONTE
Braz. J. Chem. Eng.
DATA DE PUBLICAÇÃO
2014-09
RESUMO
In this paper, the influence of biofilm carriers in a MBR on the performance of organic matter and nitrogen removal and the influence on membrane fouling were evaluated. The configurations studied included a Conventional Membrane Bioreactor (C-MBR) and a Biofilm Membrane Bioreactor (BF-MBR) operated in parallel, both fed with domestic wastewater. Regarding organic matter removal, no statistically significant differences were observed between C-MBR and BF-MBR, producing an effluent with a Soluble COD concentration of 27 ± 9.0 mgO2/L and 26 ±1.0 mgO2/L and BOD concentration of 6.0 ± 2.5 mgO2/L and 6.2 ± 2.1 mgO2/L, respectively. On the other hand, the BF-MBR produced a permeate with lower ammonia and total nitrogen concentrations, which resulted in a removal efficiency of 98% and 73%, respectively. It was also observed that the fouling rate was about 35% higher in the C-MBR than that for the BF-MBR, which also presented a reduction of total membrane resistance, about 29%, and increased operational cycle length around 7 days, compared to C-MBR.
Documentos Relacionados
- Optimizing the operational conditions of a membrane bioreactor used for domestic wastewater treatment
- Treatment of dairy wastewater with a membrane bioreactor
- Application of submerged membrane bioreactor technology for the treatment of high strength dairy wastewater
- Incorporation of the concept of microbial product formation into ASM3 and the modeling of a membrane bioreactor for wastewater treatment
- Comparison between irrigation and conventional treatment for empyema and pneumonectomy space infection.