Characterization of sugarcane bagasse ash (SBA) and its evaluation for use in alkali-activated slag mixtures
AUTOR(ES)
Lima, V. M. E. de; Barros, L. C.; Melo Neto, A. A. de
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
2021-03
RESUMO
Abstract This work proposed to incorporate the sugarcane bagasse ash (SBA) with a high content of organic matter (loss on ignition of 35.87%) in alkali-activated mixtures with blast furnace slag. After grinding SBA, replacement ratios of 10%, 20%, and 30% of the ground ash were used for the flowability evaluation. The mixtures containing 20% and 30% showed a dry consistency, then only the mixture with 10% of slag was used for the other tests. The use of an air-entraining admixture led to an improvement in the flowability of the alkali-activated mixtures. X-ray diffraction results showed that both SBA and the air-entraining admixture did not interfere in the mineralogical composition of the hydrated products. However, the use of SBA led to a decrease in the compressive strength of about 20% to 28%. In conclusion, SBA proved to be viable for use in alkali-activated mixtures considering its effect on mechanical performance.
Documentos Relacionados
- Corrosion of reinforcing bars embedded in alkali-activated slag concrete subjected to chloride attack
- Estudo da retração em argamassa com cimento de escória ativada.
- Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
- A study on the compressive strength and microstructure characteristic of alkali-activated metakaolin cement
- Cinzas volantes álcali-ativadas com solução combinada de NaOH e Ca(OH)2