Characterization of a quarter torus filter for vacuum arc ion flux transmission
AUTOR(ES)
Kelly, H., Márquez, A., Pirrera, M.
FONTE
Brazilian Journal of Physics
DATA DE PUBLICAÇÃO
2004-12
RESUMO
Measurements on the ion flux transmission in a magnetically filtered d-c vacuum arc are presented. The device includes a metallic plasma-generating chamber with water-cooled electrodes coupled to a substrate chamber through a quarter-torus magnetic filter. It is employed a Copper cathode (6 cm in diameter) with a Copper annular anode. The filter consists in a steel cylinder 500 mm length and 100 mm inner diameter with 90o of bending angle and corrugated lateral walls, surrounded by a magnetic field generating coil. The arc is operated at a current level of 100 A, and the intensity of the filtering magnetic field was in the range 0¡200 G (measured at the knee of the filter). This magnetic field is enough high so as to magnetize the electrons but not the ions. The discharge is ignited by bringing (and later removing) a tungsten striker into contact with the cathode. The arc voltage drop, the floating potentials of the filter and the plasma, and the ion current collected by probes located at different positions as functions of the magnetic field intensity are reported and compared with measurements presented in the literature with other similar devices.
Documentos Relacionados
- Ion flux transmission along an insulating duct with an axial magnetic field
- Gaseous Shielding Gas Additives as Flux Substitute for TIG Arc Brazing
- Design and implementation of a Quarter Mode Substrate Integrated Waveguide (QMSIW) cavity filter
- Spectroscopic measurements in a titanium vacuum arc with different ambient gases
- Scanning transmission ion microscope with a field ion source.
