Biomechanical Stability of Four Fixation Constructs for Distal Radius Fractures

AUTOR(ES)
FONTE

Springer-Verlag

RESUMO

Implants available for distal radius fracture fixation include dorsal nonlocked plating (DNLP), volar locked plating (VLP), radial–ulnar dual-column locked plating (DCPs), and locked intramedullary fixation (IMN). This study examines the biomechanical properties of these four different fixation constructs. In 28 fresh-frozen radii, a wedge osteotomy was performed, creating an unstable fracture model and the four fixation constructs employed (DNLP, VLP, DCPs, and IMN). Dorsal bending loads were applied and bending stiffness, load to yield 5 mm displacement, and ultimate failure were measured. Bending stiffness for VLP (16.7 N/mm) was significantly higher than for DNLP (6.8 N/mm), while IMN (12.6 N/mm) and DCPs (11.8 N/mm) were similar. Ultimate load to failure occurred at 278.2 N for the VLP, 245.7 N for the IMN, and 52.0 N for the DNLP. The VLP was significantly stronger than the DNLP and DCPs, and the IMN and DCPs were stronger than the DNLP. The VLP has higher average bending stiffness, ultimate bending strength, and resistance to 5 mm displacement than the other constructs and significantly higher ultimate bending strength than the DCPs and DNLP. There was no statistically significant difference between the VLP and IMN. VLP and IMN fixation of distal radius fractures can achieve comparable stability.

ACESSO AO ARTIGO

Documentos Relacionados