Avaliação do efeito do tratamento a plasma sobre a superfície de filmes de polietileno verde e argila vermiculita

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

25/11/2019

RESUMO

RESUMO O Polietileno (PE) Verde é um polímero sintético que apresenta baixa energia superficial, que resulta em fraca propriedade de adesão. Esta baixa adesão, provoca alguns problemas relativos às aplicações práticas dos polímeros, como fraca aderência de tintas de impressão, revestimentos, adesivos e metais à superfície do polímero, entre outros. Uma maneira de alterar essa propriedade é por meio da aplicação de um tratamento por plasma. Neste sentido, o objetivo deste trabalho foi preparar, via extrusão plana, filmes de biocompósitos com matriz de PE Verde (PEPURO) e carga de argila Vermiculita Expandida (VMT) no teor de 1%. Os filmes foram tratados por plasma em duas condições distintas: sob atmosfera de Oxigênio (O2) (C1); e sob atmosfera correspondendo a mistura de Argônio/Hidrogênio (Ar/H2) e um posterior tratamento por plasma sob atmosfera de O2 (C2). Os resultados indicaram que os tratamentos a plasma e a incorporação de VMT aumentaram a hidrofilicidade dos filmes, sendo que a aplicação da condição 2 (C2) mostrou-se de maneira mais eficiente. O PEPURO não tratado apresentou redução significativa de resistência máxima a tração com a inserção de VMT, já com a aplicação dos tratamentos (C1 e C2) os valores de resistência foram superiores. Em relação à rugosidade foi possível verificar que a aplicação do plasma aumentou a rugosidade na superfície das amostras. Estes resultados indicaram que o aumento da hidrofilicidade e da rugosidade resultaram em um aumento significativo na interação de fluidos com a superfície e também melhora das características adesivas do polímero.ABSTRACT Green Polyethylene (PE) is a synthetic polymer that has low surface energy, which results in poor adhesion properties. This factor causes some problems regarding the practical applications of polymers, such as poor adherence of printing inks, coatings, adhesives and metals to the surface of the polymer, among others. One way to alter this property is by applying a plasma treatment. In this sense, the objective of this work was to prepare, by flat extrusion, biocomposite films with Green PE matrix (PEPURO) and load of Expanded Vermiculite Clay (VMT) in the 1% content. The films were treated by plasma under two different conditions: under O2 atmosphere (C1); (Ar/H2) and a subsequent treatment by plasma under O2 (C2) atmosphere. The results indicated that the plasma treatments and the incorporation of VMT increased the hydrophilicity of the films, and the application of condition 2 (C2) was shown more efficiently. The untreated PEPURO presented a significant reduction of maximum tensile strength with the insertion of VMT, already with the application of treatments (C1 and C2) the resistance values were higher. In relation to the roughness it was possible to verify that the application of the plasma increased the surface roughness of the samples. These results indicated that increased hydrophilicity and roughness resulted in a significant increase in the interaction of fluids with the surface and also improvement of the adhesive characteristics of the polymer.

Documentos Relacionados