Análise da formação de bandas de cisalhamento por meio de corpos de prova de tração especiais
AUTOR(ES)
Arisson Carvalho de Araujo
DATA DE PUBLICAÇÃO
2009
RESUMO
The present paper has as main purpose analyze the formation of shear bands in metallic sheets of steel low carbon (SAE 1006) submitted to uniaxial tension test. This verification has been made through the numerical analysis using the software Deform2D, as well as the realization of physical tests by the tensions test specimen notched with varied geometries. It has been risen the curve of flow and the anisotropy of the material used for the realization of numerical simulation. After this simulation, formations analyses of bands have been made using many steps in each test specimen and, then, comparing this same formation between the test specimen with geometries of different notches. At last, it has been checked that as much the formation of shear bands as the characteristics of fracture in the studied material are directly related with the geometrical shape of the notch.
ASSUNTO(S)
processos de fabricação teses. método dos elementos finitos teses. engenharia mecânica teses.
ACESSO AO ARTIGO
http://hdl.handle.net/1843/MDAD-7WDHGADocumentos Relacionados
- Análise da formação de bandas de cisalhamento por meio de corpos-de-prova de tração especiais
- Determinação da redução da resistência à tração em corpos de prova com Weld Line
- Análise patogenética dos distúrbios cognitivos em esquizofrênicos confusionais (Kleist) por meio da prova de Rorschach
- Análise do coeficiente de variação em testes de resistência da união ao cisalhamento e tração
- Avaliação da influência do entalhe em corpos de prova ensaiados a baixa taxa de deformação em meio etanol