A correction method for the analytical model in Raman amplifiers systems based on energy conservation assumption
AUTOR(ES)
Coelho, Thiago V. N., dos Santos, A. Bessa, Jucá, Marco A., C. Jr, Luiz C., Pontes, Maria J., L.Barbero, Andres P.
FONTE
J. Microw. Optoelectron. Electromagn. Appl.
DATA DE PUBLICAÇÃO
2016-09
RESUMO
Abstract This paper presents a modification for the already consolidated analytical model that calculates the gain and ripple in multi-pump Raman amplifiers by considering energy conservation. The original analytical model precisely computes the pump-pump interaction to the C- and L-band for a WDM input signal. However, when this method is used to amplify a large bandwidth, as the entire C and a part of the L band, the increase in the number of pump lasers impacts the obtained results. The error, if compared with results obtained by a numerical method, becomes significant. An analysis in terms of energy is proposed to minimize the discrepancy between analytical and numerical results. An improvement is observed to the gain results.
Documentos Relacionados
- Study and Optimization of Raman Amplifiers in Tellurite-Based Optical Fibers for Wide-Band Telecommunication Systems
- Gain profile optimization for Raman+EDFA hybrid amplifiers with recycled pumps for WDM systems
- A quantitative model for membrane fusion based on low-energy intermediates
- Alternative analytical method for metal determination in inorganic fertilizers based on ultrasound-assisted extraction
- Pairing gap energy correction in Shell model for the neutron-rich tin isotopes