Api
Mostrando 25-36 de 899 artigos, teses e dissertações.
-
25. Análise da Influência de Parâmetros de Soldagem em Características Microestruturais e Mecânicas de Juntas Soldadas de um Tubo de Aço API X70Q para Aplicação Sour Service
Resumo O aço X70 é um material que possui boa relação entre resistência mecânica e tenacidade, sendo um grau bastante utilizado em condução/transporte de óleo e gás. Com o objetivo de avaliar a soldabilidade deste material, características microestruturais e mecânicas foram avaliadas ao longo da seção transversal de juntas obtidas por soldage
Soldag. insp.. Publicado em: 10/07/2018
-
26. Biofilm Formation and Corrosion on Carbon Steel API 5LX60 in Clayey Soil
Corrosion of buried pipelines is a matter of concern to the oil and gas industry since the time when carbon steel began to be widely used in these pipelines for the transportation of fluids. The microbial communities associated with biofilms promote modification in the surrounding environment and may accentuate the degradation of oil and gas pipelines causin
Mat. Res.. Publicado em: 19/04/2018
-
27. Fissuração pelo Hidrogênio em um Aço API 5L X70 Soldado com Eletrodos Celulósicos de Diferentes Níveis de Resistência
Resumo Aços classificados segundo a norma do American Petroleum Institute (API) enfrentam o problema de trincamento a frio decorrente da soldagem. Neste trabalho foi estudado, por meio do ensaio de implante, o efeito da resistência mecânica do metal de solda sobre a susceptibilidade de um aço API-5L-X70 ao trincamento pelo hidrogênio. As soldas foram
Soldag. insp.. Publicado em: 2018-03
-
28. Analysis of 3D Planar Laminations in a Welded Section of API 5L X52 Applying the Finite Element Method
Abstract The mechanical behavior of API 5L X52 steel with planar type laminations was studied in the present work. Planar laminations were proposed in the base metal (BM), heat affected zone (HAZ) and welding bead (WB). Three-dimensional finite element (FE) models, kinematic hardening and mechanical properties for BM, HAZ, and WB were activated in the finit
Soldag. insp.. Publicado em: 2018-03
-
29. Influência dos cátions lítio (Li + ), sódio (Na + ) e potássio (K + ) na reologia de bentonitas brasileiras para uso em fluidos de perfuração base aquosa
Resumo Os cátions lítio (Li+), sódio (Na+) e potássio (K+) encontram-se em primeiro lugar no plano de seletividade para a obtenção de bentonitas monocatiônicas a partir das policatiônicas, influenciando de forma específica o comportamento reológico dos fluidos de perfuração base água. O objetivo deste trabalho foi estudar a influência do Li+, N
Cerâmica. Publicado em: 2018-03
-
30. Modeling of the temperature field generated by the deposition of weld bead on a steel butt joint by FEM techniques and thermographic images.
The aim of this work is to predict the temperature field generated by welding a steel butt joint (API 5L X80). The prediction was modeled by finite element software Abaqus where the subroutine was developed in Fortran so that heat source motion may be included. The motion was based on the Goldak's double ellipsoid. In the model material nonlinearities were i
Mat. Res.. Publicado em: 23/02/2018
-
31. Prednisone raw material characterization and formulation development
ABSTRACT Solid dosage forms for oral use, particularly tablets, are the most highly used dosage forms in therapy because they are easily administered, have high productivity and relatively low cost and provide a more stable drug to form a semi-solid net. Numerous parameters influence the quality of the final dosage form. In this study, the dissolution profil
Braz. J. Pharm. Sci.. Publicado em: 08/01/2018
-
32. Efeito dos Tratamentos Térmicos de Normalização e de Solubilização na Microestrutura de uma Junta Dissimilar Soldada entre um Tubo de Aço API 5L X-52 e o Inconel 625
Resumo O propósito deste trabalho é comparar as mudanças na microestrutura e na dureza de um tubo de aço API 5L X-52, revestido internamente por soldagem com Inconel 625, após a execução dos tratamentos térmicos de normalização a 1100 °C por 60 min. e resfriamento ao ar, e de solubilização a 1030 °C com aquecimento por indução eletromagnétic
Soldag. insp.. Publicado em: 21/12/2017
-
33. Uma Análise Comparativa entre Diferentes Versões de Variantes Modernas do Processo MIG/MAG para o Passe de Raiz em Soldagem Orbital
Resumo O presente trabalho visa obter o conhecimento detalhado de diferentes versões do processo MIG/MAG por transferência em curto-circuito com controle de corrente e sua aplicabilidade na soldagem de raiz em chanfro V sem a utilização de anteparo da poça (backing). Embora muitos trabalhos na área de soldagem de tubos descrevam realizar o procedimento
Soldag. insp.. Publicado em: 21/12/2017
-
34. Urban malaria transmission in a non-endemic area in the Andean region of Colombia
BACKGROUND Rapid urbanisation in difficult socio-economic conditions such as inadequate housing infrastructure, lack of public services, improper sanitation, and poor water drainage systems in vegetation-rich areas lead to ecological conditions that are conducive to the breeding of mosquitoes and transmission of malaria, in semi-urban and urban settings. O
Mem. Inst. Oswaldo Cruz. Publicado em: 2017-12
-
35. Does trait mindfulness level affect quitting cannabis use? A six week follow-up study
Abstract Background: Only 29% of cannabis dependent individuals seek treatment, yet significant decreases in cannabis use are seen in 31-36% of individuals that seek treatment. Follow-up studies have found that over 60% in substance use disorders end in relapse, leading to potentially chronic and relapsing cases. New and effective therapies should be resear
Arch. Clin. Psychiatry (São Paulo). Publicado em: 2017-12
-
36. Corrosion Behavior of API 5L X80 Steel in the Produced Water of Onshore Oil Recovery Facilities
High-strength low-alloy steel is used in pipelines, which transport oil/gas and also produced water in the process of the secondary recovery of oil. This paper investigates the corrosion of X80 steel after immersion in static systems (biotic and abiotic). The corrosion rate, the corrosion morphology and the hardness of the coupons were investigated. The corr
Mat. Res.. Publicado em: 09/10/2017