Ansys
Mostrando 1-12 de 332 artigos, teses e dissertações.
-
1. Avaliação de estratégias de ventilação natural para salas de aula em clima subtropical úmido
Resumo Salas de aula são ambientes de longa permanência, nas quais o conforto térmico é fundamental para o processo de ensino e aprendizagem. No contexto imposto pela Covid-19, são exigidas maiores taxas de ventilação natural, o que pode afetar o conforto térmico. Esta pesquisa objetivou investigar 16 estratégias de ventilação natural em salas de
Ambiente Construído. Publicado em: 2023
-
2. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
3. A New Miniaturized Low-Profile and Stable Dual-Band FSS with 2.5D Structure for ISM Bands
Abstract Based on 2.5-Dimensional (2.5D) frequency selective surface (FSS) structures, a new miniaturized frequency selective surface structure is proposed in this work to operate as a bandreject filter in the 2.4 GHz (2400 to 2483.5 MHz) and 5 GHz (5150 to 5350 MHz and 5470 to 5725 MHz) ISM (Industrial, Scientific, and Medical) bands. The FSS has the metall
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Broadband Antennas Based on the Double Moebius Strip
Abstract The family of new antenna designs based on the double Moebius strip principle is proposed in this article. Three possible options of the power supply port location had been reviewed in this respect: the cut external strip with the signal port located directly in the cut area is used; the continuous rings without discontinuities are applied, with the
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. Calibration of simulation parameters for wind erosion gas-solid two-phase flow in arid and semiarid soils
RESUMO Para construir um modelo de simulação acoplada da erosão eólica do solo e fluxo bifásico em regiões áridas e semi-áridas, os parâmetros de contato apropriados do modelo de simulação de elementos discretos do solo são obtidos com base no teste de calibração do ângulo de repouso (AoR). O modelo de simulação acoplado foi estabelecido atr
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
6. Modelagem computacional do trocador de calor solo-ar adaptado às condições climáticas de Belém
Resumo A demanda mundial de energia está em constante crescimento, ao mesmo tempo as reservas de combustíveis fósseis estão diminuindo e não serão suficientes para satisfazer as demandas globais de energia no futuro. Além disso, os sistemas convencionais de aquecimento e refrigeração consomem a maior parte da demanda por energia elevando considerave
Ambient. constr.. Publicado em: 2021-04
-
7. Ventilação natural na reabilitação de edifícios de escritórios em contexto urbano denso e clima quente e úmido
Resumo Estudos recentes evidenciam que soluções arquitetônicas simples e não invasivas possibilitam recuperar o potencial de ventilação natural na reabilitação de edifícios em clima temperado. No entanto, a eficiência destas soluções em meios urbanos densos e clima quente e úmido ainda não foi investigada. Este artigo objetiva avaliar os benef�
Ambient. constr.. Publicado em: 2021-04
-
8. Analysis of the Resonator Element in Different Positions in the Circular Patch Microstrip Antenna
Abstract In this article, a circular patch microstrip antenna with a metamaterial resonator for 4G applications is proposed. For the design of the circular antenna patch, an approximate calculation was performed. The circular resonator is inserted into the patch for some antennas, in different positions for a parametric study. When incorporating the resonato
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
9. Bandwidth Enhancement of Microstrip Patch Antenna Using Metasurface
Abstract In this article, bandwidth enhancement of a microstrip patch antenna using a new kind of metasurface is discussed. This new geometry is used to generate new resonances in antenna and with an optimal position of the metasurface in relation to antenna we can overlap the resonances and obtain a large bandwidth. The proposed antenna showed a bandwidth f
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
10. Grating Lobes Suppression in Frequency Selective Surfaces Using Electromagnetic Band Gap with Square Holes
Abstract In this paper, the authors present a proposal for an application of electromagnetic bandgap (EBG), for suppression of grating lobes, in frequency selective surfaces (FSS), not yet studied in the literature. An alternative type of EBG with square holes was proposed to reduce the computational effort in simulations. The study consists of an applicatio
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
11. Evaluation of stability of three different mini-implants, based on thread shape factor and numerical analysis of stress around mini-implants with different insertion angle, with relation to en-masse retraction force
RESUMO Objetivos: Avaliar a estabilidade de três diferentes tipos de mini-implantes, com base no fator formato da rosca (thread shape factor, TSF), e avaliar a tensão no local de inserção e no osso cortical ao redor dos mini-implantes inseridos com dois ângulos diferentes, durante a aplicação de força para retração. Métodos: Foram usados três d
Dental Press J. Orthod.. Publicado em: 2020-12
-
12. Optimization of geometrically nonlinear truss structures under dynamic loading
Abstract The goal of this article is to present the formulation of the optimization problem of truss structures with geometric nonlinearity under dynamic loads and provide examples of this problem. The formulated optimization problem aims to determine the cross-sectional area of the bars that minimizes the weight of the structure, imposing constraints on nod
REM, Int. Eng. J.. Publicado em: 2020-09