Annealing
Mostrando 25-36 de 1007 artigos, teses e dissertações.
-
25. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
26. Production of Nanometric Bi4Ti3O 12 Powders: from Synthesis to Optical and Dielectric Properties
This paper aims to evaluate the synthesis and annealing parameters for production of nanometric Bi4Ti3O12 and its properties. The powders were obtained through the solution combustion route and the impacts of annealing temperature on the materials’ physicochemical features as well as their optical and electrical properties were investigated. Thus, the prep
Mat. Res.. Publicado em: 16/07/2018
-
27. Annealing and Extended Etching Improve a Torsional Resonator for Thin Film Internal Friction Measurements
We evaluate two methods to improve the background internal friction of the Double Paddle Oscillator (DPO), which has a nominal low temperature value of Q-1 ≈ 2×10-8. We find that annealing the DPO in vacuum at 300°C for 3 hours systematically reduced Q-1 at all temperatures and revealed a 100K internal friction peak by permanently removing it. We also fi
Mat. Res.. Publicado em: 18/06/2018
-
28. Cell and Bacteria-Baterial Interactions on the Ti10Mo8Nb Alloy After Surface Modification
The purpose of this study is the surface modification of Ti10Mo8Nb experimental alloy by using TiO2 nanostructure growth. Ingots of the Ti10Mo8Nb experimental alloy were produced by fusion from sheets of molybdenum, niobium, and titanium commercially pure in an arc melting furnace under argon atmosphere. The potentiostatic anodic oxidation was performed usin
Mat. Res.. Publicado em: 18/06/2018
-
29. Structural, Thermal, Optical, and Photoacoustic Study of Mechanically Alloyed Nanocrystalline SnTe
A nanostructured SnTe phase was produced by mechanical alloying after 2 h of milling. Part of the as-milled powder was annealed and its X-ray diffraction (XRD) pattern was recorded. The XRD patterns of the as-milled and annealed samples were refined using the Rietveld method. After annealing, partial decomposition of the SnTe phase was observed and corrobora
Mat. Res.. Publicado em: 07/06/2018
-
30. The Iron Sulfides Crystal Growth from the Halide Melts
A new approach to a single crystals growth of the iron sulfide phases of definite structure and nonstoichiometry is developed and applied. This approach is based on the method of crystal growing from solution melts. This approach is based on the crystallization or recrystallization of iron sulfides from iron sulfide solutions in iron dihalide melts under fix
Mat. Res.. Publicado em: 21/05/2018
-
31. Kinetics of Vacancy Doping in SrTiO3 Studied by in situ Electrical Resistivity
The kinetics of annealing to transform stoichiometric SrTiO3 insulator into a vacancy-doped semiconductor-superconductor was revisited by in situ electrical resistivity measurements. SrTiO3 single crystals were grown by Floating Zone Method. Using a homemade apparatus several electrical resistivity as a function of time were measured at different temperature
Mat. Res.. Publicado em: 03/05/2018
-
32. Annealing Effects on the Structural and Optical Properties of ZnO Nanostructures
ZnO nanostructures were synthesized by a proteic sol-gel method, using zinc nitrate hexahydrate and gelatin as precursors. Size and shape evolution of ZnO nanostructures were achieved by annealing temperature in the range 250-1000 ºC. The crystalline structure, morphology and optical properties of the ZnO nanoparticles were characterized by X-Ray Diffractio
Mat. Res.. Publicado em: 05/03/2018
-
33. Direct block scheduling technology: Analysis of Avidity
Abstract This study is focused on Direct Block Scheduling testing (Direct Multi-Period Scheduling methodology) which schedules mine production considering the correct discount factor of each mining block, resulting in the final pit. Each block is analyzed individually in order to define the best target period. This methodology presents an improvement of the
REM, Int. Eng. J.. Publicado em: 2018-03
-
34. Microstructural Evolution of a Pearlitic Steel Subjected to Thermomechanical Processing
The microstructural alterations suffered during the process of drawing deformation and subsequent annealing of pearlitic steel wires, were evaluated by scanning electron microscopy and atomic force microscopy. The deformed material showed the curling structure in cross section while, in the longitudinal section, the lamellae was aligned with the drawing dire
Mat. Res.. Publicado em: 26/02/2018
-
35. Spray Deposited Nanostructured CuO Thin Films: Influence of Substrate Temperature and Annealing Process
In this study, CuO thin films were deposited on glass substrates at a wide range of temperatures from 450ºC to 550ºC with steps of 25ºC by chemical spray pyrolysis technique. Aiming to investigate the effect of annealing process, one of the resulting films was annealed at 450ºC for 3 hours under ambient air. Based on X-ray diffraction, all the resulting
Mat. Res.. Publicado em: 11/01/2018
-
36. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018