Aisi 304 Stainless Steel
Mostrando 13-24 de 71 artigos, teses e dissertações.
-
13. Wear resistance of AISI 304 stainless steel submitted to low temperature plasma carburizing
Abstract Despite the AISI 304 stainless steel has high corrosion/oxidation resistance, its tribological properties are poor, being one of the barriers for use in severe wear applications. Thus, there is a wide field for studying technologies that aim to increase the surface hardness and wear resistance of this material. In this work, hardness and wear resist
REM, Int. Eng. J.. Publicado em: 2017-09
-
14. Influence of Temperature on Mechanical Properties, Fracture Morphology and Strain Hardening Behavior of a 304 Stainless Steel
The strain hardening behavior of an AISI 304 stainless steel at different temperatures was investigated in this work. Specimens were tensile tested up to rupture at temperatures of 25, 50, 75, 100, 125 and 150 ºC by using a universal testing machine with an attached environmental test chamber. The induction of martensite by strain was assessed by X-ray diff
Mat. Res.. Publicado em: 05/06/2017
-
15. Effect of Cold Work on Cavitation Resistance of an Austenitic Stainless Steel Coating
Abstract Machining procedures of welding deposits are usual and result on cold work hardened surfaces. The cold work effect on cavitation erosion of an austenitic stainless steel surface is assessed. FeCrMnSiB coatings were processed by PTA on AISI 304 plates. Specimens were grouped as the cold work deformed surface (CWHS) and the undeformed polished surface
Mat. Res.. Publicado em: 01/08/2016
-
16. Structure and Properties of Titanium Doped Tungsten Disulfide Thin Films Produced via the Magnetron Co-Sputtering DC Technique
ABSTRACT In this work, titanium doped tungsten disulfide thin films (WS2-Ti) were deposited on AISI 304 stainless-steel substrates using the magnetron co-sputtering DC technique. Films were produced with varying titanium-cathode power from 0 to 25 W. The titanium content of the WS2 structure was determined using energy dispersive spectroscopy (EDS), thereby
Matéria (Rio J.). Publicado em: 2016-06
-
17. Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
The degradation of AISI 304L stainless steel under static corrosion, liquid impingement and corrosion-erosion was studied using polarization curves. Static corrosion and liquid impingement tests were performed in 3.5% NaCl solution. Corrosion-erosion tests were performed in the same solution, containing 10 wt-% of three different SiO2 particle sizes. Synergi
Mat. Res.. Publicado em: 04/03/2016
-
18. Corrosion resistance of AISI 304 and 444 stainless steel pipes in sanitizing solutions of clean-in-place process
Stainless steel (SS) is successfully used in food industries due to the characteristics of its surface, which is essential for the maintenance of the properties of food. Tanks and stainless steel pipes, which come into direct contact with food and drink, undergo a process of cleaning and disinfecting called CIP (Clean-in-Place). This method consists of autom
Mat. Res.. Publicado em: 05/02/2016
-
19. Use of Direct Current Resistivity Measurements to Assess AISI 304 Austenitic Stainless Steel Sensitization
This paper describes the feasibility of using direct current electrical resistivity measurements to evaluate AISI 304 austenitic stainless steel sensitization. ASTM A262 – Practice A and double loop electrochemical potentiodynamic reactivation (DL-EPR) tests were performed to assess the degree of sensitization (DoS) qualitatively and quantitatively, and el
Mat. Res.. Publicado em: 2015-04
-
20. Mechanical, structural and tribological properties of superaustenitic stainless steel submitted at solution heat treatment
O aço inoxidável superasutenítico apresenta diversas aplicações tecnológicas, principalmente em ambientes corrosivos. A precipitação de diferentes fases pode alterar algumas de suas propriedades mecânicas. Tais alterações afetam vários fatores, incluindo a vida útil do material diante de condições de trabalho adversas. Neste estudo, medidas de
Matéria (Rio J.). Publicado em: 2015-03
-
21. Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints
In this research work, the weldability of low alloyed AISI 4340 aeronautical steel and AISI 304L austenitic stainless steel joined by continuous current (CC) and pulsed current (PC) gas tungsten arc welding (GTAW) techniques, using ER309L and ERNiCr-3 filler metals was investigated. The main focus of the study involves the investigation on the effect of cont
Mat. Res.. Publicado em: 2015-02
-
22. Prediction of Friction Stir Welding defect-free joints of AISI 304 austenitic stainless steel through axial force profile understanding
Friction Stir Welding (FSW) joints of AISI 304 austenitic stainless steel (304 SS) using position controlled mode were investigated in order to understand and relate axial force behavior to welding quality. Joints were produced using two tools and four combinations of specific parameters. The results showed coherence between the axial force profiles and the
Mat. Res.. Publicado em: 2014-10
-
23. Designing of CK45 carbon steel and AISI 304 stainless steel dissimilar welds
Gas tungsten arc welding of CK45 and AISI304 stainless steel was performed through preparation of different types of samples using ER308L and ERNi-1 wires. Welded samples were studied by different techniques including optical metallography, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction, hardness
Mat. Res.. Publicado em: 11/10/2013
-
24. Reduction of Aeromonas hidrophyla biofilm on stainless stell surface by essential oils
This study demonstrates the possibility of using sanitizing detergents based on natural products for the elimination and/or reduction of Aeromonas hydrophila biofilm formed on stainless steel surfaces. The goal of this work was to determine the reduction effect of sanitizing detergents containing essential oils of Thymus vulgaris (thyme) and Cymbopogon citra
Braz. J. Microbiol.. Publicado em: 05/04/2013