3d Numerical Model
Mostrando 1-12 de 103 artigos, teses e dissertações.
-
1. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
2. Study of the interaction of concrete walls with the foundation structure
Abstract This article presents a study of the factors that influence the mechanism of soil-structure interaction with a pilot building having concrete walls and their impact on their performance. To illustrate the studies carried out, a numerical modeling of a four-floor concrete wall pilot building was performed, subjected to vertical actions, supported by
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. NUMERICAL AND EXPERIMENTAL INVESTIGATION OF AIR-WATER SYSTEM TO SIMULATE BUBBLE DYNAMICS IN LIQUID SODIUM POOL
Abstract The dynamics of rising bubbles in a liquid sodium pool plays a significant role in the estimation of the radiological source term during anticipated transients and normal operation of a fast reactor. Sodium is chemically reactive with air and water. Therefore, carrying out experiments using sodium on a reactor scale level requires extra precautions.
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
4. NUMERICAL SIMULATION OF COAL GASIFICATION IN A CIRCULATING FLUIDIZED BED GASIFIER
Abstract This paper presents a 3D full-loop simulation of a circulating fluidized bed gasifier. The model is validated with experimental results from the literature. The validated model is thereupon used to compare Bubbling Fluidized Bed (BFB) and Circulating Fluidized Bed (CFB) gasifiers to highlight the effect of a change in fluidization regime from bubbli
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Study of natural ventilation in a Gothic multi-tunnel greenhouse designed to produce rose (Rosa spp.) in the high-Andean tropic
Resumo Nas regiões tropicais, a produção de plantas ornamentais é desenvolvida exclusivamente em estufas plásticas ventiladas de forma natural, o que significa que em algumas ocasiões microclimas inadequados são gerados com altas temperaturas e umidade que limitam o desenvolvimento produtivo das plantas. O objetivo deste trabalho foi estudar os fluxos
Ornam. Hortic.. Publicado em: 12/08/2019
-
6. Mechanical Mechanism Analysis and Influencing Factors of Subway Cross Passage Construction
Abstract The construction of the cross passage changes the main tunnels segment from a complete cylindrical structure to a notched unstable stressed structure. Thus, the overall force (bending and shearing) performance of the main tunnels is considerably decreased. The excavation of the cross passage also destroys the stability of the original soil layer and
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
7. Effect of Boundary Layer and Rotor Speed on Broadband Noise from Wind Turbines
ABSTRACT: Trailing edge surface of aerofoil is an important source of broadband aerodynamic noise production. In this paper, three aerofoil self-noise mechanisms from turbulent boundary layer near trailing edge surface are studied. Numerical computations were performed for a three bladed 2 MW horizontal axis upwind turbine of blade length 37 m and source hei
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
8. Development and application of a flexible numerical model to evaluate the safety of room-and-pillar mines
Abstract The design of room-and-pillar mines relies on the correct estimation of the safety indicator of the underground structures formed by the excavation of drifts. Thus, the study of the geomechanical behavior is of vital importance. The mathematical models play an important role in the identification of problematic areas and allows different configurati
REM, Int. Eng. J.. Publicado em: 2019-03
-
9. Numerical study of the behaviour of loop bar splicing in joints of reinforced concrete structures
Resumo Emendas com barras retas ocupam muito espaço devido ao comprimento de traspasse necessário. Dessa forma, em situações em que há uma limitação de espaço para a emenda, uma armação que constitui uma solução interessante é a emenda por meio de laço, que, apesar de ter poucos estudos relacionados, vem sendo bastante difundida na construção
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
10. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
11. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines
Abstract To simulate the progressive failure of pinned joint in quasi-isotropic [0/45/-45/90]s glass fiber reinforced polymer (GFRP) composite laminates used in pipeline, 3-D finite element model is employed in the present work. Hashin failure criterion as a progressive damage model associated with Virtual-Crack-Closing-Technique (VCCT) delamination model h
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
12. Strength analysis of composite cables
Abstract Carbon Fiber Reinforced Polymer (CFRP) cables, due to their outstanding performance in terms of specific stiffness and strength, are usually found in civil construction applications and, more recently, in the Oil & Gas sector. However, experimental data and theoretical solutions for these cables are very limited. On the contrary, several theoretica
Lat. Am. j. solids struct.. Publicado em: 04/06/2018